1 There are a large number of leveling rolls and they are closely arranged: 32/40/50/63/80 series 19 rollers; 100 series 17 rollers; 125 series 15 rollers; 160 series 13 rollers. ect.
2 The diameter of the straightening roller is obviously 50% smaller than that of the mechanical parallel roller straightening
machine, and the arrangement is also very tight. A large number of staggered
3 الترتيب أيضًا محكم جدًا، حيث يضمن عدد كبير من بكرات الدعم المتداخلة عدم ثني أسطوانة التسوية وتشوهها عند الضغط عليها.
4 يحافظ الضغط الهيدروليكي القوي على الفجوة (الحد الميت الميكانيكي) بين الأسطوانات العلوية والسفلية دون تغيير طوال الوقت.
5 إن هيكل الضغط الهيدروليكي ثلاثي الحزم ذو الصلابة الجيدة يقلل من درجة التشوه الإجمالية للآلة إلى الحد الأدنى عندما تعمل.
6 المساحة الموجودة على الجانب الأيمن من الجهاز مفتوحة لسهولة التنظيف والصيانة واستبدال أسطوانة التسوية
7 معدات معالجة بلاستيكية جديدة موفرة للطاقة وصديقة للبيئة ومنخفضة الكربون للألواح المعدنية وأجزاء الطائرة
Table for leveled width range of 40 series (Material Q235/yield strength 235Mpa)
لا
|
نموذج
|
ADV-LG 40-500-19
|
ADV-LG 40-1000-19
|
ADV-LG 40-1300-19
|
1
|
قطر الأسطوانة
|
40 ملم
|
||
2
|
رقم الأسطوانة
|
19
|
19
|
19
|
3
|
العرض المستوي الاسمي
|
500 ملم
|
1000 ملم
|
1300 ملم
|
4
|
سمك اللوحة المقدرة
|
0.6-1.8mm
|
||
5
|
الأعلى. سماكة الطبق
|
3.6mm
|
||
6
|
دقة مستوية
|
K
|
||
7
|
ملائم
|
لف الشريط، شريط الصلب، الصفائح المعدنية، الخ
|
Machine principle
The leveling machine adopts a row of intermediate rollers installed between the upper and lower rows of leveling work rollers and the support bearings (wheels), forming a double or triple roller structure at the upper and lower levels, with a total of four or six layers. The rollers are arranged in a staggered manner, and the amount of bending can be controlled by the electronic control system. Through repeated bending of the leveling rollers, the metal surface tends to be flat.
انقر هنا لترك رسالة