1 There are a large number of leveling rolls and they are closely arranged: 32/40/50/63/80 series 19 rollers; 100 series 17 rollers; 125 series 15 rollers; 160 series 13 rollers. ect.
2 The diameter of the straightening roller is obviously 50% smaller than that of the mechanical parallel roller straightening
machine, and the arrangement is also very tight. A large number of staggered
3 La disposición también es muy ajustada, una gran cantidad de rodillos de soporte escalonados aseguran que el rodillo nivelador no se doble ni deforme cuando se tensiona.
4 La fuerte presión hidráulica mantiene el espacio (límite muerto mecánico) entre los rodillos superior e inferior sin cambios en todo momento.
5 La estructura de la prensa hidráulica de tres vigas con buena rigidez reduce al mínimo el grado de deformación general de la máquina cuando está en funcionamiento.
6 El espacio en el lado derecho del equipo está abierto para facilitar la limpieza, mantenimiento y reemplazo del rodillo nivelador.
7 Nuevos equipos de procesamiento de plástico para placas metálicas y piezas planas que ahorran energía, son respetuosos con el medio ambiente y tienen bajas emisiones de carbono.
Table for leveled width range of 40 series (Material Q235/yield strength 235Mpa)
No
|
Modelo
|
ADV-LG 40-500-19
|
ADV-LG 40-1000-19
|
ADV-LG 40-1300-19
|
1
|
Diámetro del rodillo
|
40mm
|
||
2
|
Número de rodillo
|
19
|
19
|
19
|
3
|
Ancho nominal nivelado
|
500 mm
|
1000 mm
|
1300 mm
|
4
|
Espesor nominal de la placa
|
0.6-1.8mm
|
||
5
|
Máx. espesor de la placa
|
3.6mm
|
||
6
|
Precisión nivelada
|
K
|
||
7
|
Aplicable
|
Bobinado de cintas, flejes de acero, chapas, etc.
|
Machine principle
The leveling machine adopts a row of intermediate rollers installed between the upper and lower rows of leveling work rollers and the support bearings (wheels), forming a double or triple roller structure at the upper and lower levels, with a total of four or six layers. The rollers are arranged in a staggered manner, and the amount of bending can be controlled by the electronic control system. Through repeated bending of the leveling rollers, the metal surface tends to be flat.
haga clic aquí para dejar un mensaje