ADV 508-HR Heavy Slag Removal Machine
製品ビデオ
製品説明
1.Heavy slag, also known as dross, is basically molten metal on parts that are produced during thermal cutting operations: oxy-fuel, flame cutting and plasma cutting.
2.The ADV 508-HR series is used for heavy slag removal, deburring,edge rounding and oxide layer removal of thick carbon steel plate.
2.The ADV 508-HR series is used for heavy slag removal, deburring,edge rounding and oxide layer removal of thick carbon steel plate.
3.The standard available width is 800mm, 1100mm, 1400mm, or customized.
4.The deburring machine can process parts with a minimum size of 30mm*30mm(with a magnetic table).
マシンパラメータ
|
モデル
|
ADV 508-HR800 heavy slag removal metal deburring machine
|
|
Effective processing width
|
30-800 mm
|
|
Processing thickness
|
0.5～100mm
|
|
Minimum Machinable Size
|
30*30mm
|
|
ベルトサイズ
|
2000*820mm
|
|
搬送速度
|
0.5-8m/min frequency control
|
|
No.1 motor power
|
2.2*2kw(cleaning hammer or sand block)
|
|
No.2 motor power
|
11kw(abrasive belt)
|
|
モーターの動力を伝える
|
1.5kw
|
|
Vacuum adsorption motor power
|
15 kw(optional)
|
|
モーターの総出力
|
37kw
|
|
機械サイズ
|
3200*1800*2400mm
|
応用業種とサンプル
* The slag does not contribute to the strength and protection of the metal, but is rather a form of waste.
* The slag formation does not look attractive nor professional from an aesthetic point of view.
* The metal slag makes it difficult to apply an adhesive coating to the surface.
* The slag formation does not look attractive nor professional from an aesthetic point of view.
* The metal slag makes it difficult to apply an adhesive coating to the surface.
より詳しい情報
HR combinations that can be customized according to customer requirements(H=hammer, R=sand belt, S=sand block, W=rotary brush)
Function of HR series equipment
- Efficient removal of heavy slag on the surface of parts
- The surface of parts shall be polished after treatment
- Blunt the inner and outer contour of the part
- Strong magnetic adsorption force, satisfy smaller parts
- 研磨材の自動補正
- 研磨材交換のリマインダー
- Different combination depending on the customer’s needs
Features of HR series equipment
- 非効率な手作業によるワーク研削を活字加工で代替
- Finish cutting slag and oxide layer removal with one feeding
- This equipment is equipped with 2 sets of slag cleaning hammer structure
- PLCタッチ操作、装置にはLED光源が内蔵されています
- Strong magnetic conveying platform, which can process small parts
- 作業時の粉塵を吸収するオプションの湿式集塵機
お問い合わせを送信
購読する
ニュースレター
ここをクリックしてメッセージを残してください