1 There are a large number of leveling rolls and they are closely arranged: 32/40/50/63/80 series 19 rollers; 100 series 17 rollers; 125 series 15 rollers; 160 series 13 rollers. ect.
2 The diameter of the straightening roller is obviously 50% smaller than that of the mechanical parallel roller straightening
machine, and the arrangement is also very tight. A large number of staggered
3 배열도 매우 빡빡하며, 다수의 엇갈린 지지 롤러가 응력을 받을 때 레벨링 롤러가 구부러지거나 변형되지 않도록 보장합니다.
4 강력한 유압으로 상하 롤러의 간격(기계적 한계치)이 항상 일정하게 유지됩니다.
5 강성이 좋은 3빔 유압프레스 구조로 작동시 기계의 전체적인 변형 정도를 최소한으로 줄여줍니다.
6 장비 우측 공간이 개방되어 있어 레벨링 롤러의 청소, 유지보수 및 교체가 용이합니다.
7 금속판, 평면부품을 위한 에너지 절약형, 친환경, 저탄소 플라스틱 신가공 장비
Table for leveled width range of 40 series (Material Q235/yield strength 235Mpa)
아니요
|
모델
|
ADV-LG 40-500-19
|
ADV-LG 40-1000-19
|
ADV-LG 40-1300-19
|
1
|
롤러 직경
|
40mm
|
||
2
|
롤러 번호
|
19
|
19
|
19
|
3
|
공칭 수평 폭
|
500mm
|
1000mm
|
1300mm
|
4
|
정격 판 두께
|
0.6-1.8mm
|
||
5
|
최대. 판 두께
|
3.6mm
|
||
6
|
균일한 정밀도
|
K
|
||
7
|
해당되는
|
테이프 코일링, 스트립 강철, 판금 등
|
Machine principle
The leveling machine adopts a row of intermediate rollers installed between the upper and lower rows of leveling work rollers and the support bearings (wheels), forming a double or triple roller structure at the upper and lower levels, with a total of four or six layers. The rollers are arranged in a staggered manner, and the amount of bending can be controlled by the electronic control system. Through repeated bending of the leveling rollers, the metal surface tends to be flat.
메시지를 남기려면 여기를 클릭하세요