ADV 508-RY
제품 비디오
제품 설명
Features of the ADV 508-RY deburring machine
Used for removing large burrs / slag or surface polishing effect
The disc brush is evenly ground to improve the service life of abrasives
Disc brush control system to ensure consistent parts processing effect
PLC touch operation, and the equipment has built-in LED source
Vacuum or strong magnetic conveying platform, which can process small parts
Optional wet dust collector to absorb dust when working
Automatic deburring machine for die stamping and precision parts
Deslagging
디버링
가장자리 반올림
산화물 제거
기계 매개 변수
| 모델 | ADV 508-RY450 | ADV 508-RY630 | ADV 508-RY800 | ADV 508-RY1100 | ADV 508-RY1300 | ADV 508-RY1500 |
| Effective processing width (mm) | 30-450 | 30-630 | 30-800 | 30-1100 | 30-1300 | 30-1500 |
| Processing thickness (mm) | 0.5-100 | 0.5-100 | 0.5-100 | 0.5-100 | 0.5-100 | 0.5-100 |
| Minimum workpiece size | Magnetic suction 30*30 mm, Vacuum suction 50*50 mm | |||||
| Abrasive belt linear speed (m/s) | 3-15 | 3-15 | 3-15 | 3-15 | 3-15 | 3-15 |
| Number of disc brush | 3 | 5 | 7 | 11 | 13 | 15 |
| Conveying speed (m/s) | 0.5-7 | 0.5-7 | 0.5-7 | 0.5-7 | 0.5-7 | 0.5-7 |
| Abrasive belt motor power | 7.5 kw | 15 kw | 15 kw | 18.5 kw | 22 kw | 22 kw |
| 디스크 브러시 모터 파워 | 1.1 kw*3 | 1.1 kw*5 | 1.1 kw*7 | 1.1 kw*11 | 1.1 kw*13 | 1.1 kw*15 |
자세한 정보
Wide belt: deburring large areas at one time for metal parts surface
Hammer pin disc: remove heavy slag and dross from plasma or flame-cut sheet metal parts.
Steel wire disc: remove the oxide layer on the cutting surface
Deburring disc: remove minor burrs and edge rounding