ADV 508-HR
Product Video
Product Description
1.Heavy slag, also known as dross, is basically molten metal on parts that are produced during thermal cutting operations: oxy-fuel, flame cutting and plasma cutting.
2.The ADV 508-HR series is used for heavy slag removal, deburring,edge rounding and oxide layer removal of thick carbon steel plate.
2.The ADV 508-HR series is used for heavy slag removal, deburring,edge rounding and oxide layer removal of thick carbon steel plate.
3.The standard available width is 800mm, 1100mm, 1400mm, or customized.
4.The deburring machine can process parts with a minimum size of 30mm*30mm(with a vacuum or magnetic table).
Machine Parameters
|
Model
|
ADV 508-HR800 heavy slag removal metal deburring machine
|
|
Effective processing width
|
30-800 mm
|
|
Processing thickness
|
0.5-100mm
|
|
Minimum Machinable Size
|
30*30mm
|
|
Belt size
|
2000*820mm
|
|
Conveying speed
|
0.5-8m/min frequency control
|
|
No.1 motor power
|
2.2*2kw(cleaning hammer or sand block)
|
|
No.2 motor power
|
11kw(abrasive belt)
|
|
Conveying motor power
|
1.5kw
|
|
Vacuum adsorption motor power
|
15 kw(optional)
|
|
Total motor power
|
37kw
|
|
Machine size
|
3200*1800*2400mm
|
Application industry and sample
* The slag does not contribute to the strength and protection of the metal, but is rather a form of waste.
* The slag formation does not look attractive nor professional from an aesthetic point of view.
* The metal slag makes it difficult to apply an adhesive coating to the surface.
* The slag formation does not look attractive nor professional from an aesthetic point of view.
* The metal slag makes it difficult to apply an adhesive coating to the surface.
More Info
HR combinations that can be customized according to customer requirements(H=hammer, R=sand belt, S=sand block, W=rotary brush)
