ADV 108-H3 Fully Automatic Tube Polishing Machine (Three-station)
1. ADV 108-H3 series fully automatic polishing machine has the first planetary motion system. Its work is controlled by the touch screen. Each station of this series of machines can be switched on and off and controlled independently.
2. Planetary tube polisher machine is the best choice for polishing and brushing round and curved tubes. It is a new polishing method with high-speed revolution and rotation of the abrasive belt and no rotation of the tube itself.
3. ADV 108-H3 series, multi-head design can greatly shorten the processing time and improve production efficiency
4. The equipment is equipped with an automatic feeding system, and each station is equipped with a sensor to enable the pipe to enter and exit the polishing area better
5. A combination of sanding belts with different grits can make the pipe from rough to fine in one step
6. The touch screen control enables an easy and friendly use of the machine. All the parameters can be easily set up
HAYIR
|
Öğe
|
Şartname
|
1
|
Mevcut tüp çapı
|
Ø10 – Ø110mm
|
2
|
Toplam motor gücü
|
12KW
|
3
|
Aşındırıcı Bant Motor Gücü
|
2.2*3KW
|
4
|
Ana motorun dönme hızı
|
1200-3300rpm
|
5
|
Aşındırıcı bant hızı
|
7,8-18m/s
|
6
|
Transfer tekerleği motor gücü
|
1.5*3kw
|
7
|
Besleme sistemi motor gücü
|
3x 0,12KW
|
8
|
Besleme hızı
|
0,7-4 m/dak
|
9
|
Aşındırıcı bantların boyutu
|
(6)940 x 50mm
|
The application range of round tube polishing machine is relatively wide. Slender round workpieces can be polished with this polishing machine. The materials of workpieces that can be polished are also relatively wide, such as common steel pipes, aluminum pipes, copper rods, iron pipes and other materials. Through polishing, rust and scratches on the outer surface of the workpiece can be removed, while improving the outer surface finish of the workpiece and reducing surface roughness.
ADV 108-H3 planetary tube polishing machine can use any type of abrasive belt (corundum, zirconium, ceramic, diamond, Scotch-Brite, wool) to achieve different finishing requirements, can complete multiple grinding and polishing with different coarseness and fineness, abrasive belt speed and feeding speed are adjustable to meet the grinding and polishing requirements of workpieces with different diameters and materials, optional wet water grinding system, wet dust collector (cannot be used with water grinding system) equipped with dust cover, environmentally friendly and safe
Mesaj bırakmak için buraya tıklayın