ADV 108-H3 Round Tube Polishing Machine
Vídeo do produto
Descrição do produto
ADV 108-H3 Fully Automatic Tube Polishing Machine (Three-station)
1. ADV 108-H3 series fully automatic polishing machine has the first planetary motion system. Its work is controlled by the touch screen. Each station of this series of machines can be switched on and off and controlled independently.
2. Planetary tube polisher machine is the best choice for polishing and brushing round and curved tubes. It is a new polishing method with high-speed revolution and rotation of the abrasive belt and no rotation of the tube itself.
3. ADV 108-H3 series, multi-head design can greatly shorten the processing time and improve production efficiency
4. The equipment is equipped with an automatic feeding system, and each station is equipped with a sensor to enable the pipe to enter and exit the polishing area better
5. A combination of sanding belts with different grits can make the pipe from rough to fine in one step
6. The touch screen control enables an easy and friendly use of the machine. All the parameters can be easily set up
Parâmetros da máquina
|
Não
|
Item
|
Especificação
|
|
1
|
Diâmetro do tubo disponível
|
Ø10 – Ø 110 mm
|
|
2
|
Potência total do motor
|
12KW
|
|
3
|
Potência do motor da correia abrasiva
|
2,2*3KW
|
|
4
|
Velocidade de rotação do motor principal
|
1200-3300 rpm
|
|
5
|
Velocidade da cinta abrasiva
|
7,8-18m/s
|
|
6
|
Potência do motor da roda de transferência
|
1,5*3kw
|
|
7
|
Potência do motor do sistema de alimentação
|
3x0,12 kW
|
|
8
|
Velocidade de alimentação
|
0,7－4m/min
|
|
9
|
Tamanho das cintas abrasivas
|
（6）940 x 50mm
|
Indústria de aplicação e amostra
The application range of round tube polishing machine is relatively wide. Slender round workpieces can be polished with this polishing machine. The materials of workpieces that can be polished are also relatively wide, such as common steel pipes, aluminum pipes, copper rods, iron pipes and other materials. Through polishing, rust and scratches on the outer surface of the workpiece can be removed, while improving the outer surface finish of the workpiece and reducing surface roughness.
Mais informações
ADV 108-H3 planetary tube polishing machine can use any type of abrasive belt (corundum, zirconium, ceramic, diamond, Scotch-Brite, wool) to achieve different finishing requirements, can complete multiple grinding and polishing with different coarseness and fineness, abrasive belt speed and feeding speed are adjustable to meet the grinding and polishing requirements of workpieces with different diameters and materials, optional wet water grinding system, wet dust collector (cannot be used with water grinding system) equipped with dust cover, environmentally friendly and safe
Enviar consulta
SE INSCREVER
BOLETIM DE NOTÍCIAS
Clique aqui para deixar uma mensagem