1 There are a large number of leveling rolls and they are closely arranged: 32/40/50/63/80 series 19 rollers; 100 series 17 rollers; 125 series 15 rollers; 160 series 13 rollers. ect.
2 The diameter of the straightening roller is obviously 50% smaller than that of the mechanical parallel roller straightening
machine, and the arrangement is also very tight. A large number of staggered
3 The arrangement is also very tight, a large number of staggered supporting rollers ensure that the leveling roller does not bend and deform when stressed.
4 The strong hydraulic pressure keeps the gap (mechanical dead limit) between the upper and lower rollers unchanged all the time.
5 The three-beam hydraulic press structure with good rigidity reduces the overall deformation degree of the machine to the minimum when it works.
6 The space on the right side of the equipment is open for easy cleaning, maintenance and replacement of the leveling roller
7 New energy-saving, environment-friendly and low-carbon plastic processing equipment for metal plates and plane parts
Table for leveled width range of 32 series (Material Q235/yield strength 235Mpa)
No
|
Model
|
ADV-LG 32-300-19
|
ADV-LG 32-500-19
|
ADV-LG 32-800-19
|
ADV-LG 32-1300-19
|
1
|
Roller diameter
|
32mm
|
|||
2
|
Roller number
|
19
|
|||
3
|
Nominal leveled width
|
300mm
|
500mm
|
800mm
|
1300mm
|
4
|
Rated plate thickness
|
0.4-1.2mm
|
0.4-1.2mm
|
0.4-1.2mm
|
0.4-1.2mm
|
5
|
Max. plate thickness
|
2.4 mm
|
|||
6
|
Leveled precision
|
K
|
|||
7
|
Applicable
|
Tape coiling, strip steel, sheet metal, etc
|
ADV leveling machine series is complete, which can process plates with a width of 0-2100mm and a thickness of 0.05-30mm. It can precisely straighten linear guide rail, rack, square steel, flat steel, angle steel and other section steels (before and after heat treatment)
click here to leave a message